Mach5ive Screen Savers are available for several resin 3D printer models. See the full list, along with links here.
Protect your screen now before this happens to you:
This product is an improvement over our previous screen protection kits! Most resin 3D printers do not have screen protection to protect you from a FEP leak, resin spills or damage from a dropped build plate. You need to protect your screen by securing the Mach5ive Screen Saver over the screen and bezel of your printer. This will help to protect your printer screen and internals from resin spills.
- SAVE YOUR SCREEN! The Mach5ive Screen Saver is your clear screen protection solution. Protects your screen and printer internals from the damage that a resin spill can cause. Seals the gap between the screen and printer chassis.
- PROTECT YOUR POLARIZER – Use our Screen Saver to protect your printer’s polarizer! On most printers, the screen and polarizer is not protected by glass and it can be scratched easily or damaged by a resin spill. You must re-level your build plate per the instructions included after install. You may need to increase your exposure times, as the Screen Saver will allow greater than 93% of the light through.
- SAVE TIME WITH PREP - Now you're no longer forced to tidy up your printer right after a print. Apply our Screen Saver and have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks.
- QUALITY PROTECTION – Why take the risk of damaging your printer internals, LCD or FEP film? Avoid expensive repairs by applying our Screen Saver and protecting your printer. Several sizes are available. Select from the drop-down above!
- EXTRA DURABLE - Made of high-quality PET, our Screen Saver is built to last. At .13 mm thick installed, it is resin-proof and safe from tears and abrasion, while remaining very flexible. Kit includes 2 Screen Savers.
- SCREEN TAPE - Replacement screen tape is included. If you're replacing your screen, or you just need to replace the tape surrounding the screen, we've got you covered.
- INSTALLATION KIT - Installation kit is included. Contains microfiber cloth, screen wipes, squeegee, and installation instructions.
Our screen protector features:
- Protective film layers on top and bottom to prevent scratches during shipping.
- Top layer PET hard-coating to help prevent damage from a dropped build plate or other potential damage.
- Optical PET layer.
- Silicon adhesive layer for easy application.
- Total thickness after install: .13mm - less than an extra sheet of FEP!
You will need to re-level your build plate after installing. You should increase your exposure times by 7%.
Fits the following printers (use size-selection drop-down):
- Phrozen Sonic Mighty 4K & 5K
- Elegoo Saturn
- Anycubic Photon Mono-X
- EPAX X10
- Peopoly Phenom
- Peopoly Phenom L
- Poepoly Noir
- Phrozen Transform
- Printers with 5.5" Screens:
- Elegoo Mars / Mars Pro / Mars C
- EPAX X1 Series
- Anycubic Photon / Photon-S
- Creality LD-002R, QIDI Tech Shadow 5.5 (not 6.0)
- Wanhao D7
- Longer Orange 30
- Longer Orange 4K
- Phrozen Sonic Mini
- Printers with 6" Screens:
- Elegoo Mars 2 Pro
- EPAX X1 Series
- EPAX E6
- QIDI TECH Shadow 6.0 Pro
- Creality LD-002H
- Anycubic Photon Mono & Mono SE
- Voxelab Polaris
- Flash Forge Foto 6.0
If can't find a protector for your specific resin 3D printer, please contact us using this form and we can work together to develop one.
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection